Introduction
Gasboard-9060 Online Biogas Monitoring System is designed to measure the concentration of CH4 ,CO2 ,H2S and O2 continuously in different biogas applications. It consists of four parts: Gas sampling and conditioning unit, Gas analysis unit, Control unit for auto drain and Data transmission, multiple sampling points is supported. Automatically proceed sampling, analyzing, drainage and so on process. Realized unattended operation 7*24hrs biogas monitoring
Features
1. Gasboard-9060 measures CH4, CO2 and O2 gases for continuous monitoring
2. The modular sensor design enables users easy on serviceability and onsite maintenance
3. Supports multiple sampling points
4. Optional heater or cooler is available applied to different applications condition.
5. Adopts self-developed H2S modular with auto air purge to applied to high/ low H2S monitoring.
6. Free maintenance gas conditioning unit and corrosion resistant design.
7. Equipped with 7 inch touch screen to display real time data timely.
8. Comprehensive technical proposal, installation and after-sales services.
Applications
Landfill site
Waste water treatment
Bio-methane plant
CDM project
Anaerobic digestion
Other fermentation processes
Specifications:
|
Component
|
Technology
|
Measuring range
|
Resolution
|
Precision
|
Repeatability
|
|
CH4
|
NDIR
|
0-100%
|
0.01%
|
≤±2%FS
|
≤1%
|
|
CO2
|
NDIR
|
0-50%
|
0.01%
|
≤±2%FS
|
≤1%
|
|
O2
|
ECD
|
0-25%
|
0.01%
|
≤±3%FS
|
≤1%
|
|
H2S
|
ECD
|
0-10000ppm
|
1ppm
|
≤±3%FS
|
≤1%
|
|
Note: Measuring range can be defined as customer request
|
|
Wall-mount IP54 stainless steel cabinet for outdoor installation.
|
|
Mechanical specifications
|
|
Dimensions
|
H700 x W450 x D220 mm
|
|
Material
|
stainless steel, plate thick 2 mm
|
|
Installation parts
|
4 brackets for wall mounting
|
|
Hinged front door with visualization
|
|
Door clamping with 6 bolts M8
|
|
Environmental conditions
|
|
Operating temperature range
|
-15°C to +45°C
|
|
Operating humidity range
|
0-95% RH non condensing
|
|
Environment pressure range
|
800-1200 hPa
|
|
Other component specifications:
|
|
Stainless steel connector for gas inlet, gas outlet, zero air inlet and drain ports
|
|
Manual valve for measure/calibration selection
|
|
Gas flow adjuster
|
|
Gas sampling and conditioning(Flexble):
|
|
Pre-filtration by coalescing filter with peristaltic pump for continuous condensate removal
|
|
Built-in heater avoid water condensate block the pipe in the winter
|
